
Clean water from a burst pipe
Supply water is the cleanest category, so wet materials can often be dried in place once the standing water is out.
See water extractionWhen a pipe bursts, a lower level floods or a sewer backs up in Mahtomedi, the crew pulls the standing water out first, then dries the structure with air movers and dehumidifiers until readings are normal.
(888) 432-4933Call about water removal now
24/7Water dispatchWater and sewage losses only. Moisture readings and photos are kept for the insurer, and the crew explains each step first.
(888) 432-4933Every job starts with a moisture map and ends with documented readings, so the household and the insurer can see what was wet and when it was dry again.
Meters and thermal imaging find wet framing and subfloor that look dry on the surface, so nothing is sealed up damp.
Air movers and dehumidifiers are matched to the room, the materials and how long they were wet.
The crew handles only water and sewage losses, so every tool on the truck is chosen for drying.
Photos, readings and daily drying logs are kept so the claim file shows exactly what happened.
Stop the source. Close the main water valve for a leaking pipe or appliance, and cut power to wet areas only when that is safe.
Photograph the damage. Take clear photos of wet rooms, damaged belongings and any standing water before anything is moved or thrown away.
Move small valuables. Lift rugs, papers and electronics to dry surfaces, and leave heavy furniture where it stands.
Call the crew. Call right away so extraction can start, since wet drywall and subfloor begin to break down in a day or two.
Contact the insurer. Report the loss to the insurance company and keep the photos and drying records the crew provides.


Supply water is the cleanest category, so wet materials can often be dried in place once the standing water is out.
See water extraction
Washer, dishwasher and refrigerator leaks spread under flooring and into walls, so the floor and the ceiling below get checked.
See appliance leaks
Contaminated water calls for protective gear, cutting out soaked porous materials and sanitizing, not only drying out the space.
How sewage is handledEach service below covers a different way water gets into a building, and each one ends with the framing and subfloor dried back to normal readings.
Water Extraction and RemovalStanding water from a burst pipe, a backed up drain or storm runoff is pulled out first with commercial extractors.View service
Basement Water DamageWater on a lower level is removed, wet drywall and flooring are checked, and the space is dried before rebuilding.View service
Sump Pump Failure CleanupWhen a pump stops and water reaches the home, the crew removes it and dries the floor and walls.View service
Frozen Pipe Burst CleanupA split pipe in a cold wall can soak several rooms, so the water is removed and the wet cavities are dried.View service
Ice Dam and Roof Leak Water DamageHeavy snow and repeated freeze and thaw can push meltwater under shingles, wetting the insulation, ceiling and walls below.View service
Ceiling Leak Water DamageA ceiling stain means water is trapped above it, so the source is traced and the wet drywall is dried.View service
River and Flash Flood CleanupHeavy rain and runoff that reach a building are pumped out, and the soaked materials are sorted, removed or dried.View service
Sewage Backup CleanupSewage is treated as contaminated water: it is removed, affected materials are cut out, and the area is cleaned and sanitized.View service
Water Heater Leak CleanupA leaking tank is shut off, the water is extracted, and the utility room and nearby finished space are dried.View service
Appliance and Supply Hose LeaksA washer, dishwasher or refrigerator hose that lets go is stopped, then the water is removed and the floor is dried.View service
Structural Drying and DehumidificationAir movers and dehumidifiers run until moisture readings in the framing and subfloor match normal, dry levels.View service
Commercial Water DamageShops, offices, schools and multi unit buildings need drying planned around staff, stock and a business that must reopen.View service
The goal is a dry standard, meaning framing, subfloor and drywall all read back at normal moisture levels, and the crew confirms it with a meter before any equipment leaves the building.
Moisture meters and a thermal camera show where water traveled beyond the visible stain or puddle.
Extractors and pumps take out standing water, then wet padding and loose materials are carried out.
Air movers and dehumidifiers are placed to move air across wet surfaces and pull moisture out of the room.
Readings are taken each day, equipment is adjusted, and the job ends only when materials hit their dry targets.
Most water damage jobs run from about $600 for one small room to $20,000 for a whole lower level, and the final figure depends on the water category, the area wet and how long it sat.
Prices shift with the water category, the number of rooms and the materials involved, so a written scope after the crew checks the damage is the only reliable number.
Adjusters look for proof of what was wet, how far it spread and how it was dried, so the crew records each of those from the first visit.
Keep damaged items until the adjuster has seen them or approved disposal, and write down what was in each affected room while the details are still fresh in mind.
Policies treat sudden leaks and slow seepage differently, so ask the insurer what applies, and keep every receipt for temporary repairs such as tarps or emergency plumbing.






Service reaches homes, schools and businesses throughout Mahtomedi, from the White Bear Lake shore to the edge at Century Avenue.
A call at any hour is enough to begin: describe what is wet and where it came from, and the crew explains the plan before extraction starts.
Mahtomedi, MN · [email protected]
Mahtomedi sits on the east shore of White Bear Lake, and the city runs its storm sewer system under an inspection and maintenance program. Water still finds its way into buildings from plumbing, roofs and heavy rain.
The city asks residents to keep streets, gutters and storm drains clear, since a blocked drain or pipe is where runoff backups often begin.
Between 2014 and 2016 the city built a runoff culvert in the back yards of the homes involved, and water sometimes backed up there during heavy rain.
The city's attorney said backups sometimes happened when various items clogged the pipe under Fernwood Street, a reminder that small blockages can mean big wet losses.
Regionally, Minnesota winters bring frozen pipes and ice dams, and the water from either one often shows up as stained ceilings and wet insulation.
Inside the house, a failed hose, water heater or sump pump is a common cause, and these leaks often go unnoticed behind finished walls.

August 2018 The Pioneer Press reported that five homeowners settled a flooding lawsuit with the city, which agreed to rebuild pipes and reroute upstream water without admitting fault.
Do not wait for it to dry on its own. Call now and the crew will tell you what to do first and start extraction.
(888) 432-4933 (888) 432-4933Talk to a drying proDrying should begin right away, because wet drywall, insulation and subfloor start to break down within a day or two and mold can follow. Extraction comes first, then air movers and dehumidifiers run until the readings are normal.
The first job is making sure the source is stopped, then standing water is removed with extractors and pumps before any drying equipment is set. Moisture meters then show how far the water traveled.
Small clean water jobs start near $600, finished lower levels run about $4,000 to $9,000, and a whole level or contaminated loss can reach $20,000. A written scope after the damage is checked gives the real number.
Coverage depends on the policy and on whether the water was sudden or gradual, so ask the insurer before work is scoped. Keep every photo, drying record and receipt, because adjusters look for them.
Clean water caught early often lets carpet, pad and drywall dry in place, but anything soaked with sewage or left wet for days is usually cut out and replaced. Meter readings decide which materials stay.
Yes. Sewage is contaminated water, so a sewage backup cleanup starts with protective gear and containment, then porous materials that soaked it up are removed and everything the water touched is sanitized before drying begins.
Most structural drying runs several days, depending on the materials and how much water they absorbed. Dense materials such as hardwood and concrete take longest. The crew takes moisture readings each day and removes equipment only after the readings are normal.
The steps are the same, but timing is planned around staff, stock and customers. Shops, offices, schools and multi unit buildings are dried in sections so part of the space can stay open.
Stop the water source if it is safe, take photos, lift small valuables off wet floors and keep everyone away from standing water near outlets or appliances. Do not run household vacuums on wet floors.
Service runs to homes, businesses and schools throughout the city, including the areas along Highway 244, Interstate 694 and the White Bear Lake shore. Call any hour and describe where the water is.
Extraction, drying and sewage cleanup start with one call, any hour, and the crew explains each step along the way.
(888) 432-4933Call the drying crew now